General Purpose I O Wiring Usb 3 Ueye Le Pcb Version

By switzerlandersing On Sep 10, 2025

PCB Version USB 3 UEye LE

PCB Version USB 3 UEye LE The general purpose i/os of the usb 3 ueye le are not potential free and has no protective circuits. internal supply voltage by sensor type. gpio wiring. the following figures illustrate gpio wiring examples. gpio specifications the two gpios (general purpose i/o) can be used as inputs or outputs. General purpose i/o wiring usb ueye le (pcb version) information on the usb ueye le pcb version with lighting board can be found in the usb ueye le pcb version with lighting board chapter.

PCB Version USB 3 UEye LE

PCB Version USB 3 UEye LE The i/o connector of the usb 3 ueye le can be equipped with a 2 x 4 pin connecting plug with a 1.27 mm (50 mil) lead spacing. ids imaging development systems gmbh shall not be liable for any damage to the camera or connected devices arising from installation of the connecting plug. The general purpose i/os are not potential free and have no protective circuit. faulty wiring (overvoltage, undervoltage) can result in a damage in the electronics. This section of the manual contains information on connecting the cameras and wiring ios. for information on a camera's power consumption, please refer to the camera and sensor data section. this section contains information on all camera models sorted by sensor type. Pin assignment i/o connector gige ueye se rev. 4 / rev. 4.2 trigger input wiring gige ueye se rev. 4 / rev. 4.2 general purpose i/o wiring gige ueye se rev. 4 / rev. 4.2 gige ueye se mechanical specifications gige ueye se oem version 1 gige ueye se (c mount without housing) optical specifications gige ueye se electrical specifications gige ueye se.

PCB Version USB 3 UEye LE

PCB Version USB 3 UEye LE This section of the manual contains information on connecting the cameras and wiring ios. for information on a camera's power consumption, please refer to the camera and sensor data section. this section contains information on all camera models sorted by sensor type. Pin assignment i/o connector gige ueye se rev. 4 / rev. 4.2 trigger input wiring gige ueye se rev. 4 / rev. 4.2 general purpose i/o wiring gige ueye se rev. 4 / rev. 4.2 gige ueye se mechanical specifications gige ueye se oem version 1 gige ueye se (c mount without housing) optical specifications gige ueye se electrical specifications gige ueye se. The following specifications apply to the board level versions of the ueye le usb 3.1 gen 1. the inputs/outputs mentioned are not accessible in the housing versions. This section of the manual contains information on connecting the cameras and wiring ios. for information on a camera's power consumption, please refer to the camera and sensor data section. this section contains information on all camera models sorted by sensor type. The 10 pin i/o connector of the usb ueye le can be equipped with a 2 x 5 pin connecting plug with a 2.54 mm (0.1") lead spacing. ids imaging development systems gmbh shall not be liable for any damage to the camera or connected devices arising from installation of the connecting plug. Pcb® manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load, and shock in research and development as well as industrial applications.